KMBR 2019 Well and Rainwater harvesting

Setback for Wells and Rainwater harvesting.

• The set back from any street shall be as that required for a building.
• There shall be minimum 1.20 metres set back from other boundaries.
• The well may be located within or abutting or away from the building in the plot

The components of workable groundwater recharging arrangements include:

• Roof gutters 
• Down pipe and first flush pipe arrangement
• Filter unit and 
• Storage tank with provisions for drawing water and spill over

No leech pit, sock pit, refuse pit, earth closet or septic tank shall be allowed or made
within a distance of 7.5 metres radius from any existing well used for supply of
water for human consumption or domestic purpose or within 1.2 m distance from the
plot boundaries.

Wall and surrounding.— The well shall be protected with brick wall with minimum 1
metre height.

The minimum capacity of the rainwater storage tank

Group A1 ,A2 ,F,J	25 litres/sq.metre of Covered area
Group B,C,D,E, G1 ,G2	50 litres/sq.metre of Covered area

 

KMBR basic important definitions    KMBR2019 vs NBC 2016 Groups     Well and Rainwater harvesting    Colour Schemes in KMBR 2019

Home

AutoCAD    Building Rules Kmbr 2019 + NBC2016     Surveying    Estimation and Valuation     Structural Analysis     Strength of Material    RCC    Geotechnical Engineering    Transportation Engineering