Field Astronomy Survey terminology notes

Here are some expected FAQ related to Field Astronomy in SSC, PSC and other competitive exams.

Celestial sphere  
It is an imaginary sphere on which the stars appear to lie or to be studded.
Figure shows Celestial Sphere

Zenith (z)  
It is the point in the upper portion of the celestial sphere marked by plumb line above the observer. It is the point on the celestial sphere immediately above the observer’s station.

Nadir (Z’, or, N) 
It is the point on the lower portion of the celestial sphere marked by plumb line below the observer. It is the point on the celestial sphere vertically below the observer’s station.

Celestial Horizon or true or Rational horizon or geocentric horizon 
It is the great circle traced upon the celestial sphere by that plane which is perpendicular to the zenith –Nadir line and which passes through the centre of the earth.
(One should not confuse Horizon with equator. Equator is perpendicular to the axis of rotation of earth while Horizon is perpendicular to Zenith -Nadir which is dependent on observors position)

Sensible horizon
It is a circle in which a plane passing through the point of observation and tangential to the earth’s surface intersects with celestial sphere. The line of sight of an accurately leveled telescope lies in this plane.


Visible horizon
It is a circle of contact, with the earth, of the cone of visual rays passing through the point of observation.

Figure shows Zenith,Nadir, Sensible horizon, Visible horizon and Celestial horizon


Terrestrial poles and equator 
Terrestrial poles are the two points in which the earth’s axis of rotation meets the earth’s sphere. 
Terrestrial equator is the great circle of the earth, the plane of which is at right angles to the axis of rotation. The two poles are equidistant from the terrestrial equator.

The celestial poles and equator 
If the earth’s axis of rotation is produced indefinitely, it will meet the celestial sphere in two points called the North & South celestial poles (P and P’).
The celestial equator is the great circle of the celestial sphere in which it is intersected by the plane or terrestrial equator.

Figure shows Terrestrial poles, Terrestrial equator ,Cellestial poles and Celestial Equator


Vertical circle 
A vertical circle of the celestial sphere is great circle passing through the zenith and nadir. They all cut the celestial horizon at right angles.


Prime vertical

It is the particular vertical circle which is at right angles to the observers meridian that passes through the east & west points of horizon.

Figure shows Vertical circle, Prime Vertical and Observer's Meridian

Meridian is a great circle on the surface of earth pasing through the poles or circle of constant longitude or It is the great circle passing through zenith nadir and poles.


Observers Meridian or Reference Meridian
Observers meridian is a special meridian
 which passes through the zenith and nadir of the point as well as through the Celestial poles.


Latitude (θ)

It is the angular distance of any place on the earth’s surface measured towards north or south of the equator. It is also defined as the angle between the Zenith and the Celestial equator or Nadir and Celistial equator. Range 0°to 90°


Co-latitude
The co-latitude of a place is the angular distance from the Zenith or Nadir to the pole. It is the complement of the latitude and equal to (90°- Latitude).


The longitude (Ф)
The longitude of a place is the angle between a fixed reference meridian called the prime or first meridian and the meridian of the place. Range  0°to 180°
Figure shows Azimuth 'A' and Altitude 'α'

Azimuth (A) It is the horizontal angle between the observer’s meridian and the vertical circle passing through the heavenly body(declination circle).


The altitude (α)

The altitude of celestial or heavenly body (i.e., a sun or star) is its angular distance above or below the horizon, measured on the vertical circle passing through the body.


The co-altitude or zenith distance (z)
It is the angular distance of heavenly body from the zenith. It is the complement of the altitude.

Declination 
The declination of a celestial body is angular distance from the plane of the equator, measured along the star’s meridian.Declination varies from 0° to 90°, and is marked + or – according as the body is north or south of the equator. Great circle of celestial sphere passing through Celestial body as well as celistial poles.
Figure Shows Declination circle or Hour circle

Hour circle 

Hour circles are great circles passing through the north and south celestial poles. The declination circle of a heavenly body is thus its hour circle.

Figure shows Hour angle

Hour angle (H)
The hour angle of a heavenly body is the angle between the observer’s meridian and the declination circle passing through the body. The hour angle is always measured westwards.

Ecliptic
Apparent path of sun on celestial sphere with respect to earth.

Hope it was helpful.

 
Some Basic Definitions from KMBR 2019    Comparing NBC 2016 and KMBR 2019 Building Groups
Colour Schemes in KMBR 2019    Well and Rainwater harvesting    Coverage and Floor space index    Staircases and fire escape staircases and Ramps    Astronomical Field survey  Terminology    Building laws NBC 2016+ KMBR 2019    Major Highway developments in India -Shotnotes    Why is clay impermeable? Introduction to Survey    Chain Survey      Strength of Materials - Stress Strain    Static and Kinematic Indeterminacy    Methords of Structural Analysis    Arches

Staircases and fire escape staircases and Ramps as per KMBR2019

Staircases

Any building having more than one floor shall be provided with a staircase unless each such floor is independently accessible from ground.

minimum width of stair        120 cm

minimum width of tread        30 cm

maximum height of riser       15 cm

minimum height of handrail   90 cm 

The minimum headroom under the landing of a staircase and under the staircase shall be 2.2m.

Building having more than three floors including basement floor(s) shall have at least two staircases, one of which may be a fire escape staircase:

Escalators 

The width of escalators shall not be less than one metre.


Fire escape staircase

Fire escape staircase shall be provided for every building under

  • Residential occupancy exceeding three storeys above ground level
  • Non-residential occupancies exceeding two storeys above ground level

Width of fire escape staircase shall not be less than one metre

Tread shall not be less than 25 cm

Riser shall not exceed 19 cm and the number of risers shall not exceed 16 per flight of stairs

Height of handrail of a fire escape staircase shall not be less than 100 centimetres and not more than 120 centimetres.

The use of spiral staircase shall be limited to buildings up to 10 metres in height.

Spiral staircase shall not be less than 150 centimetres in diameter and shall be designed to give adequate head room.


Ramps

If provided as a substitute for stairways, shall be laid with a slope not exceeding in 10 and such ramp shall comply with all requirements of a stairway and shall be surfaced with approved non-slippery materials.


KMBR basic important definitions    KMBR2019 vs NBC 2016 Groups     Well and Rainwater harvesting    Colour Schemes in KMBR 2019       Coverage and Floor space indexm    Staircases and fire escape staircases and Ramps

Home

Coverage and Floor Space Index

Coverage
The maximum percentage of coverage permissible for each occupancy shall limit the foot print of a building.
                                Coverage area = [Maximum built up area/Plot area]x100

Maximum coverage permissible shall not exceed 
  • 80 per cent for residential, special residential, mercantile or commercial, small industrial and storage occupancy;
  • 60 per cent for assembly, office and industrial occupancy,
  • 50 per cent for educational, medical or hospital and 40 percent for hazardous occupancy under Group I.
The Floor Space Index (FSI) or Floor Area Ratio (FAR)
The value shall limit the maximum buildable area. 

                                    F.S.I. = Total built-up area /Plot area

----------------------------------------------------------------
Thankyou for the visit
----------------------------------------------------------------
Read more>>>

Colour scheme in KMBR 2019

Sl.No.

Item

Notational colouring

1

Plot line

Thick black line

2

Street (existing)

Brown line

3

Street (proposed)

Brown dotted line

4

Permissible building line

Thick black dotted line

5

Building(Existing)

Black outline

6

Building (proposed to be demolished)

Yellow hatching

7

Building (proposed)

Red outline

8

Drainage sewerage work

Red dotted line

9

Water supply works

Black dot and dash line

10

Electric line

Green line


KMBR basic important definitions    KMBR2019 vs NBC 2016 Groups     Well and Rainwater harvesting    Colour Schemes in KMBR 2019    Coverage and Floor space index

Home

KMBR 2019 Well and Rainwater harvesting

Setback for Wells and Rainwater harvesting.

  • The set back from any street shall be as that required for a building.
  • There shall be minimum 1.20 metres set back from other boundaries.
  • The well may be located within or abutting or away from the building in the plot
The components of workable groundwater recharging arrangements include:
  • Roof gutters 
  • Down pipe and first flush pipe arrangement
  • Filter unit and 
  • Storage tank with provisions for drawing water and spill over

No leech pit, sock pit, refuse pit, earth closet or septic tank shall be allowed or made
within a distance of 7.5 metres radius from any existing well used for supply of
water for human consumption or domestic purpose or within 1.2 m distance from the
plot boundaries.

Wall and surrounding.— The well shall be protected with brick wall with minimum 1
metre height.

The minimum capacity of the rainwater storage tank

Group A1 ,A2 ,F,J

25 litres/sq.metre of Covered area

Group B,C,D,E, G1 ,G2

50 litres/sq.metre of Covered area

 

Home

Some Basic Definitions from KMBR 2019 2

  1. Mezzanine floor means an intermediate floor in any storey overhanging and overlooking a floor beneath
  2. Mumty A cabin like structure with a covering roof over the staircase.
  3. Parapet means a low wall not more than 1.2 m in height built along the edge of a roof or a floor
  4. Plinth area means area of the building at the plinth level, and shall not include the area of open porch (not enclosed by wall), uncovered staircase
  5. Plot depth means the mean horizontal distance between the front and rear plot boundaries;
  6. Service lane means a lane provided at the rear or side of a plot for service purposes;
  7. Stair cover means cabin - like structure with a covering roof over a staircase and its landing built to enclose only the stairs for the purpose of providing protection from weather and not used for human habitation. It is synonymous with stair cabin or staircase room
  8. Tenement means part of a building intended or used or likely to be used as a dwelling unit;
  9. Travel distance means the distance an occupant has to travel to reach an exit
  10. Lift /Escalator. Any building exceeding three storeys in the case of group C Hospital/medical occupancy and four storeys in the case of other occupancies shall have at least one lift
  11. open space means an area, forming an integral part of the plot, left open to the sky

Home

Building groups as per KMBR 2019 and NBC 2016

Building Groups

KMBR 2019

Building Groups

NBC 2016

Group A1

Residential

Group A

Residential

Group A2

Lodging houses &

Special residence

 

 

Group B

Education

Group B

Education

Group C

Medical/Hospital

Group C

Institution

Group D

Assembly

Group D

Assembly

Group E

Office

Group E

Business

Group F

Mercantile/Commercial

Group F

Mercantile

Group G1

Industrial-I

Group G

Industrial

Group G2

Industrial-II

 

 

Group H

Storage

Group H

Storage

Group I

Hazardous

 

 

Group J

Multiplex Complex

Group J

Hazardous


KMBR basic important definitions    KMBR2019 vs NBC 2016 Groups     

Home